SKF 7017 ACD/HCP4AH1 Angular contact ball bearings, super-precision

SKF 7017 ACD/HCP4AH1 Angular contact ball bearings, super-precision
Angular contact ball bearings, super-precision

Tolerances: P4A, P4, PA9A, P2, Chamfer dimensionsRecommended shaft and housing fits: shafts, housingsValues for ISO tolerance classes: shafts, housingsSpeed dependent initial grease fill →Initial grease fillClamping and fitting forces: D design, E design, B design

Designation suffixes H, H1, L and L1identify variants for direct oil-air lubrication(→Variants).

d		85	mm
D		130	mm
B		22	mm
d1		98.9	mm
d2		98.9	mm
D1		116.1	mm
K		0.5	mm
C1		5.9	mm
r1,2	min.	1.1	mm
r3,4	min.	0.6	mm
a		36.2	mm

Abutment dimensions

da	min.	91	mm
db	min.	91	mm
Da	max.	124	mm
Db	max.	126	mm
ra	max.	1	mm
rb	max.	0.6	mm
dn		101.9	mm

Calculation data

Basic dynamic load rating	C		63.7	kN
Basic static load rating	C0		62	kN
Fatigue load limit	Pu		2.5	kN
Attainable speed for grease lubrication			11000	r/min
Attainable speed for oil-air lubrication			17000	r/min
Ball diameter	Dw		14.288	mm
Number of balls	z		21
Reference grease quantity	Gref		11.7	cm³
Preload and stiffness (back-to-back, face-to-face)
Preload class A	GA		400	N
Static axial stiffness, preload class A			258	N/µm
Preload class B	GB		800	N
Static axial stiffness, preload class B			338	N/µm
Preload class C	GC		1600	N
Static axial stiffness, preload class C			450	N/µm
Preload class D	GD		3200	N
Static axial stiffness, preload class D			609	N/µm
Calculation factors
Calculation factor	f		1.15
Calculation factor	f1		0.99
Calculation factor	f2A		1
Calculation factor	f2B		1.02
Calculation factor	f2C		1.05
Calculation factor	f2D		1.08
Calculation factor	fHC		1.02
Calculation factor	e		0.68
Calculation factor (single, tandem)	Y2		0.87
Calculation factor (single, tandem)	Y0		0.38
Calculation factor (single, tandem)	X2		0.41
Calculation factor (back-to-back, face-to-face)	Y1		0.92
Calculation factor (back-to-back, face-to-face)	Y2		1.41
Calculation factor (back-to-back, face-to-face)	Y0		0.76
Calculation factor (back-to-back, face-to-face)	X2		0.67

Mass

Mass bearing

0.75

kg

<input type="hidden" name="moreInfoUrl" value="">