SKF SAFS 22218-11 T SAF and SAW pillow blocks with bearings with a cylindrical bore

SKF SAFS 22218-11 T SAF and SAW pillow blocks with bearings with a cylindrical bore
SAF and SAW pillow blocks with bearings with a cylindrical bore

da		90	mm
db		104.775	mm
dc		85.725	mm
Da		160	mm
Ca		48.809	mm
A1		98.425	mm
A2		210.344	mm
S		4.763	mm
ba		40.481	mm
H		196.85	mm
H1		101.6	mm
H2		41.275	mm
J	min.	263.525	mm
J	max.	295.275	mm
J1		53.975	mm
L		349.25	mm
N1		19.05	mm
Threaded holes
R1		60.325	mm
R2		27.781	mm
RG		3/8 NPT
PG		1/8 NPT
Oil level
h		38.1	mm

Appertaining products

Housing			FSAFS 218
Bearing			22218 E
Check availability of other clearance classes (e.g. C3)
Lock nut			AN 18
Lock washer			W 18
Stabilizing ring			SR-18-15
Taconite seal (db shaft position)			TER 112
Taconite seal (dc shaft position)			TER 191

Appropriate products

End plug (suffix Y)

EPR 11

Speed ratings

Max. speed for Taconite seal

750

r/min

Recommended safe loads

P60°		101	kN
P90°		60.9	kN
P120°		38.3	kN
P150°		34.7	kN
P180°		42.3	kN
Pa		27.1	kN

Mass

Mass pillow block

29

kg

Mounting information

Cap bolt			4 x 5/8-11 UNC
Cap bolt recommended tightening torque			203.4	N·m
Cap bolt, SAE grade			5
Appropriate attachment bolt size	G		0.625	in
Initial grease fill			141.75	g

<input type="hidden" name="moreInfoUrl" value="">