SKF SNL 520-617 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

SKF SNL 520-617 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals
Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

Bearing (basic designation)			1317
Lock nut			KM 17
Lock washer			MB 17
Locating ring			2 x FRB 14.5/180

Dimensions

da		85	mm
db		95	mm
Ca		70	mm
Da		180	mm
Db		137.5	mm
A		160	mm
A1		110	mm
H		218	mm
H1		112	mm
H2		40	mm
J		320	mm
L		380	mm
N		32	mm
N1		26	mm
Dowel pins
J6		348	mm
J7		39	mm
N4	max.	8	mm
Seal dimensions
A2L		178	mm

Appropriate seals and end cover

TSN 317 A

2 x TSN 317 S

ASNH 520-617

Breaking loads, housing

P0°		470	kN
P55°		620	kN
P90°		370	kN
P120°		280	kN
P150°		250	kN
P180°		310	kN
Pa		200	kN

Yield point, cap bolts

Q120°		620	kN
Q150°		360	kN
Q180°		310	kN

Mass

Mass housing

17.6

kg

Mounting information

Cap bolt, size			M 20x100
Cap bolt, rec. tightening torque			200	N·m
Appropriate attachment bolt, size	G		24	mm
Appropriate attachment bolt, rec. tightening torque			665	N·m
Initial grease fill, 20%			390	g
Initial grease fill, 40%			630	g

<input type="hidden" name="moreInfoUrl" value="">