SKF SE 213 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

SKF SE 213 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals
Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

Bearing (basic designation)			1213
Lock nut			KM 13
Lock washer			MB 13
Locating ring			2 x FRB 14/120

Dimensions

da		65	mm
db		75	mm
Ca		51	mm
Da		120	mm
Db		92.5	mm
A		110	mm
A1		80	mm
H		149	mm
H1		80	mm
H2		30	mm
J		230	mm
L		275	mm
N		24	mm
N1		18	mm
Dowel pins
J6		252	mm
J7		29	mm
N4	max.	8	mm
Seal dimensions
A2L		128	mm

Appropriate seals and end cover

TSN 213 A

2 x TSN 213 S

ASNH 516-613

Breaking loads, housing

P0°		270	kN
P55°		340	kN
P90°		205	kN
P120°		150	kN
P150°		130	kN
P180°		170	kN
Pa		110	kN

Yield point, cap bolts

Q120°		220	kN
Q150°		125	kN
Q180°		110	kN

Mass

Mass housing

7.46

kg

Mounting information

Cap bolt, size			M 12x70
Cap bolt, rec. tightening torque			80	N·m
Appropriate attachment bolt, size	G		16	mm
Appropriate attachment bolt, rec. tightening torque			200	N·m
Initial grease fill, 20%			100	g
Initial grease fill, 40%			160	g

<input type="hidden" name="moreInfoUrl" value="">