SKF SNL 506-605 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

SKF SNL 506-605 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals
Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

Bearing (basic designation)			22206 K
Adapter sleeve			H 306
Locating ring			2 x FRB 6/62

Dimensions

da		25	mm
Ca		32	mm
Da		62	mm
Db		36.5	mm
A		77	mm
A1		52	mm
H		89	mm
H1		50	mm
H2		22	mm
J		150	mm
L		185	mm
N		20	mm
N1		15	mm
Dowel pins
J6		172	mm
J7		19	mm
N4	max.	5	mm
Seal dimensions
A2L		89	mm

Appropriate seals and end cover

TSN 506 C

TSN 506 A

2 x TSN 506 S

ASNH 506-605

Breaking loads, housing

P0°		130	kN
P55°		170	kN
P90°		100	kN
P120°		80	kN
P150°		65	kN
P180°		85	kN
Pa		55	kN

Yield point, cap bolts

Q120°		150	kN
Q150°		85	kN
Q180°		75	kN

Mass

Mass housing

2

kg

Mounting information

Cap bolt, size			M 10x40
Cap bolt, rec. tightening torque			50	N·m
Appropriate attachment bolt, size	G		12	mm
Appropriate attachment bolt, rec. tightening torque			80	N·m
Initial grease fill, 20%			25	g
Initial grease fill, 40%			40	g

<input type="hidden" name="moreInfoUrl" value="">