SKF SNL 30/500 G Split plummer block housings, large SNL series for bearings on a cylindrical seat, with standard seals

SKF SNL 30/500 G Split plummer block housings, large SNL series for bearings on a cylindrical seat, with standard seals
Split plummer block housings, large SNL series for bearings on a cylindrical seat, with standard seals

Bearing (basic designation)			230/500
Lock nut			HM 30/500
Lock washer			MS 30/500-96
Locating ring			2 x FRB 29.5/720

Dimensions

da		500	mm
db		530	mm
d2		675	mm
Ca		226	mm
Da		720	mm
A		460	mm
A1		430	mm
ATS		470	mm
ATK		590	mm
H		835	mm
H1		420	mm
H2		135	mm
J		1030	mm
J1		260	mm
L		1220	mm
N		60	mm
N1		48	mm
s		35	mm
Shaft end
ba	min.	174	mm
ba	max.	238	mm
bb		168.5	mm
bc		243.5	mm
Dowel pins
J6		1120	mm
N4	max.	35	mm

Appropriate seals and end cover

Labyrinth seal			2 x TS 560
Taconite seal			2 x TK 30/560
End cover			ETS 560

Breaking loads, housing

P0°		8000	kN
P55°		10000	kN
P90°		4800	kN
P120°		3600	kN
P150°		3100	kN
P180°		4000	kN

Yield point, cap bolts

Q120°		5800	kN
Q150°		3350	kN
Q180°		2900	kN

Mass

Mass housing

740

kg

Mounting information

Cap bolt, size			M 42x280
Cap bolt, rec. tightening torque			850	N·m
Appropriate attachment bolt, size	G		42	mm
Appropriate attachment bolt, rec. tightening torque			3640	N·m
Eye bolt, size			2 x M 42
Initial grease fill, 20%			11.5	kg
Initial grease fill, 40%			20	kg

<input type="hidden" name="moreInfoUrl" value="">